Brushed ESC Speed Controller 5A Dual Way 2-3S w/ BEC Mixed Control Bidirectional RC Cars Boats Tanks Vehicles Models Spare Parts

Brushed ESC Speed Controller 5A Dual Way 2-3S w/ BEC Mixed Control Bidirectional RC Cars Boats Tanks Vehicles Models Spare Parts

- Supported Voltage/Current: 6V-14V, single channel 5A, single channel peak 7A (suitable for 2/3S LiPo).

- ESC Dimensions/Weight: 33*20*6.5mm / 12g (including wires).

Features:

- Fail-Safe Protection: If the signal is lost (e.g., signal wire breaks during an accident), the motor will stop for safety and requires throttle re-centering to re-arm.

- Low Voltage Protection: If the supply voltage drops below 4V, the ESC will restart protection (e.g., during high-current discharge, poor-performance batteries may experience significant voltage drop, triggering ESC protection. After protection, the motor stops, and once the battery voltage recovers, re-centering the throttle will re-arm the motor).

- Overcurrent Protection: Includes overcurrent protection, but repeated overcurrent conditions may still cause damage.

- Overheat Protection: Activates at 130°C.

Usage Notes:

- Connect each motor wire directly to the motor. Do not mix them up, as this may damage the ESC.

- BEC Output: 5V, max 1.5A, suitable for powering the receiver and flight controller.

- Important Note: The onboard microcontroller is also powered at 5V (connected to the BEC). If you directly connect a 2S LiPo to the receiver, the microcontroller will burn out instantly (maximum withstand voltage is 6.5V).

  Package Included:

  1X Brushed ESC 5A