Mini 4CH 4 Channel Motor Drive Driver Shield L293 L293D Expansion Board Module

● 2 x 5V Servo Motor (Servo) Ports: Connected to Arduino's high-resolution, high-precision timer—no jitter! ● Up to 4 Bidirectional DC Motors and 4-Channel PWM Speed...

Dual H-Bridge Motor Driver For DC Or Steppers 600ma L293d

    Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps...

L293D DC Motor Drive - Stepper Motor Control Shield Module Expansion Board Fit for Arduino UNO/Duemilanove/Raspberry Pi/Computer/Arduino Mega 2560

Advanced L293D Chip: L293D is a commonly used integrated circuit chip, which is a dual H-bridge driver chip. Using this chip, you can use DC motors...

Motor Driver L298N Board Module High Power L298 DC Motor Arduino

Technical specifications ● Motor voltage: 5 V - 35 V ● Logic circuit voltage: 5 V ● Motor current: 2 A (MAX) ● Logic current: 36...

High-power ULN2003 Stepper Motor Driver Board Test Module For Arduino

    High-power ULN2003 Stepper Motor Driver Board Test Module   Description: ULN2003 is a high voltage and high current Darlington transistor array products with high...

L9110 Motor Dual-Channel H-Bridge Driver Module 12V 800Ma Arduino Compatible

L9110S Motor Driver Module Instructions 1、Module Description - Motor driver with dual L9110S chips - Module power supply voltage: 2.5-12V - Suitable motor range: Motors with...

16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module Raspberry pi shield module servo shield

  16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module Raspberry pi shield module servo shield   Description:        Want to make a hexapod walker?...

Double BTS7960 43A H-bridge High-power Motor Driver module/ diy smart car Current diagnostic for Arduino

    BTS7960B H-bridge 43A high-power motor driver Module Overview:   This driver uses chips BTS7960 composed of high-power drive full H-bridge driver module with thermal...

Raspberry Pi Serial Bus Servo Driver Board, Integrates Servo Power Supply

  Product Features: 1. Used to Connect Upper-Level Computers or MCUs: Controls the rotation of bus servos. 2. Can Simultaneously Control Up to 253 ST/SC Series...

Waveshare General Driver Board Accessory Parts for Robots Based on ESP32 Supports WIFI Bluetooth ESP-NOW

Product Features: ● Based on ESP32-WROOM-32 Module: Supports wireless communication methods such as WiFi, Bluetooth, and ESP-NOW. ● Onboard Motor Control Interface: Can control 2 DC...

Hard Drive Motor 3/4 Wire 7V-12V Brushless DC Motor Driver Controller Board With Reverse Voltage Over Current Protection

  This driver board can drive hard disk brushless motors, optical drive brushless motors, and other miniature 3-wire or 4-wire Hall-less brushless motors.   Features:  ...

HG7881 4-Channel DC Motor Driver 2.5-12V Stepper Motor Controller Board

Product Features: ● 100% brand new, high quality! ● The motor driver module comes with a built-in HG7881 chip. ● Can drive 4 DC motors or...

TB6612 Dual Motor Driver 1A TB6612FNG for Arduino Microcontroller

Description:   The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and...

Step Motor 2H Microstep Driver DM860 24V-72V for Two-phase hybrid stepper motors in 57/60/86/110mm sizes DM860H

● Product Model: DM860H ● Operating Current: 2.6~8.2A ● Voltage Range: +5V~+24V ● Operating Temperature: 0°C~50°C ● Compatible Motors: Two-phase hybrid stepper motors in 57/60/86/110mm sizes...

DM556 Digital Stepper motor driver 2 phase 5.6A for 57 86 stepper motor NEMA23 NEMA34 Stepper Motor Controller CFMY

● Model: DM556 Driver ● Operating Current: 1.4-5.6A ● Microstep Resolution: 128 ● Weight: 0.25 kg ● Voltage Range: +20V~+50V ● Compatible Motors: 42/57/60/86 Stepper Motors...

Stepper Motor Driver Stepstick A4988 Drv8825 With Heat Sink Carrier Reprap Ramps 3D Printer Parts & Accessories

Stepper Motor Driver StepStick A4988 DRV8825 With Heat sink Carrier Reprap RAMPS 3D Printer Parts       A4988 is a complete micro-stepping motor driver with...

L298N DC Dual H-Bridge Stepper Motor Driver Board Module

Technical specifications ● Motor voltage: 5 V - 35 V ● Logic circuit voltage: 5 V ● Motor current: 2 A (MAX) ● Logic current: 36...