MEGA2560 PRO MEGA 2560 R3 Mega2560 REV3 AVR (ATmega2560-16AU CH340G) Development Board with USB Cable compatible arduino

    Embedded version of Mega 2560 CH340G / ATmega2560-compatible with Arduino Mega 2560 board. Built in ATmega2560 Atmel microcontroller and CH340G USB-UART interface chip.

    The plate has a compact size of 38x55mm. It is a good solution, to make your final project in proto-board welding.

    Plate for functionality similar to Arduino Mega 2560. It is an embedded plate, but just as stable, and uses the original ATmega2560 (16 MHz) chips.

    The board used the CH340G chip as a UART-USB converter. When you work on the 12 MHz frequency, giving a stable result of the exchange of data (it is necessary to install drivers in the computer).

    Mega PRO (Embed) 2560 CH340G / ATmega2560-connects to the computer through the microUSB cable (used for almost all Android smartphones).

    You can supply power on board through the MicroUSB connector or to power the heads. The voltage regulator (LDO) can treat the incoming voltage from 6 V to 9 V (peack 18 V) DC. Output current for 5 V-around 3.3 Ma, for V-approximately 800 mA (keep in mind that the higher the input voltage, the lower the outgoing current). That will provide reliable power for most of your initial projects.

  Details:

●  Form factor-Mega PRO,

  ● Microcontroller-ATmega 2560 (16 MHz),

  ● USB-UART-CH340G interface (12 MHz),

  ● input voltage-6-9 V (peack 18 V),

  ● PC-MicroUSB connection socket

  ● 70 digital I / O,

  ● 16 analog entries

  ● 14 PWM ...

  ● 4 UART bus.

  MEGA 2560 R3 Mega2560 REV3 AVR (ATmega2560-16AU CH340G) Development Board with USB Cable compatible arduino

  Product Description：

  CH340G Replace ATMEGA16U2

  ● Microcontroller:ATmega2560

  ● Operating Voltage:5V

  ● Input Voltage (recommended):7-12V

  ● Input Voltage (limits):6-20V

  ● Digital I/O Pins:54 (of which 15 provide PWM output)

  ● Analog Input Pins:16

  ● DC Current per I/O Pin:40 mA

  ● DC Current for 3.3V Pin:50 mA

  ● Flash Memory:256 KB of which 8 KB used by bootloader

  ● SRAM:8 KB

  ● EEPROM:4 KB

  ● Clock Speed:16 MHz

  Hereby declare :

     This version is optimized in the original version , mainly for foreign customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use.

  Advantages :

  1. Completely solve the traditional 2560 board is not compatible with win7 and win8 system instability above .

  2. increase the pin socket , to facilitate the use of DuPont line.

  3. Replaced 16u2, so the cost is reduced by half.