Mini Induction Heating Board 5-12V 120W Flyback Driver Heater DIY Cooker+ Ignition Coil

# Summary of Information for Mini-Version ZVS Tap-Free Finished Product (Inductive Heating) 

## I. Product Parameters 

- Product Name: Mini-Version ZVS Module 

- Power: 120W (when inductively heating at 12V) 

- Input Voltage: DC5V - 12V (this is the working voltage range, not the no-load voltage of the power supply) 

- Size of Hot Iron Block: Length × Width × Height 30×10×4mm 

- LED Power Indicator: Blue LED 

- Product Weight: Approximately 112.7g 

## II. Instructions for Abnormal Indicator Light 

### (I) Reasons for Indicator Light Not Turning On 

- The circuit is not properly connected, and the power supply is not energized; 

- The module components are damaged. 

### (II) Reason and Solution for Dim Indicator Light 

A dim indicator light is usually due to insufficient power supply power. A power supply with higher power needs to be replaced. 

## III. Usage-Related Instructions 

- The tap-free design is suitable for inductive heating scenarios; 

- The heating coil can be directly soldered to the PCB board; 

- Specification of the hot iron block: Length × Width × Height 30×10×4mm 

## IV. General Instructions 

- The detail pictures are for reference only. The actual product received shall prevail (you can contact customer service to check the physical product pictures); 

- Due to differences in monitors and lighting, the actual color of the product may be slightly different from that shown in the pictures; a 1-2mm/g measurement error is allowed for manual measurement.