Rgb LED Breakout 5050 Smd Ws2812 RGB Addressable Pixel LED Module Strip Light

1.Specifications

- Product size (diameter): 86mm

- Net weight: 8g

- Voltage: DC4 - 7V power supply

- Communication interface: Single - wire communication

- LED driver chip: WS2812B (integrated inside the LED)

2.Product Features

- Single - wire communication can minimize the pressure on the MCU I/O ports. In addition, this RGB light uses the WS2812B driver chip, so that the peripheral circuit only needs one capacitor to meet the circuit requirements, simplifying the circuit as much as possible and bringing a concise and beautiful experience.

- This RGB ring light can be cascaded with another RGB light using the same chip through a Dout output port, without being restricted by shape. The code of this RGB light is available in the wiki link below, helping you quickly achieve a colorful display effect.

RGB LED Breakout 5050 SMD WS2812

RGB LED Breakout 5050 SMD WS2812 5PCS - This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! Several of these breakouts can even be chained together to form a display or an addressable string.

Frequently asked questions about RGB LED Breakout 5050 SMD WS2812 5PCS

Q1: What is an RGB LED Breakout 5050 SMD WS2812?

An RGB LED Breakout 5050 SMD WS2812 is a type of LED module that has a red, green, and blue LED integrated into a single package. It is also equipped with a WS2812 driver chip that allows for individual control of each LED's color and brightness. There is one RGB LED in each module.The voltage range for the RGB LED Breakout 5050 SMD WS2812 is between 3.3V to 5V(60mA per LED).

Q2: What is the viewing angle for the RGB LED Breakout 5050 SMD WS2812?

The viewing angle for the RGB LED Breakout 5050 SMD WS2812 is 120 degrees.

Q3: Can I control the RGB LED Breakout 5050 SMD WS2812 individually?

Yes, you can control each RGB LED Breakout 5050 SMD WS2812 individually using a microcontroller with the appropriate software.

Q4: How do I connect the RGB LED Breakout 5050 SMD WS2812 to a microcontroller?

You can connect the RGB LED Breakout 5050 SMD WS2812 to a microcontroller using three wires: power, ground, and data. The data line uses a single-wire serial communication protocol.

Q5: What is the maximum data transfer rate for the RGB LED Breakout 5050 SMD WS2812?

The maximum data transfer rate for the RGB LED Breakout 5050 SMD WS2812 is 800Kbps.

Q6: Can I daisy chain multiple RGB LED Breakout 5050 SMD WS2812 modules together?

Yes, you can daisy chain multiple RGB LED Breakout 5050 SMD WS2812 modules together, allowing you to control multiple LEDs with a single microcontroller.

Q7: Are there any precautions I should take when using the RGB LED Breakout 5050 SMD WS2812?

Yes, you should be careful not to exceed the maximum current rating for each LED and ensure that the power supply voltage is within the specified range. Additionally, you should ensure that the data line is properly connected and not exposed to ESD or other ele