DC 12V Linear Actuator 6000N Max Lift Stroke Electric Motor

Wiring Instructions:

● For Use with Matching Controller:

The actuator's plug is designed for use with our dedicated controller.

● For Use without Matching Controller:

Cut the connector to expose the two internal wires.

● Wire Connections:

Red wire: Positive (+)

Black wire: Negative (-)

● Direction Control:

Swap positive/negative polarity to toggle between extend and retract.

For manual control, add a DPDT (double-pole, double-throw) switch to reverse polarity.

● Performance Note:

● Speed vs. Thrust:

Higher speed = Lower thrust

Lower speed = Higher thrust

Features:

  With reliable performance, sensitive action stable running.

  Good environment adaptability.

  High quality metal material, high performance motor, built-in stroke switch.

  Maximum push/pull is up to 6000N, and stroke speed is up to 30mm/s when under no-load.

  Commonly used in automotive, medical devices and engineering industry, agricultural machinery, wedding system, industrial electric lifting system, medical electric bed, surgical bed, traction bed, electric sofa, electric lifting lever, electric booth, electric sunroof, electric wheelchair, etc.

  Specification:

  ● Model: JS-TGZ-U3

  ● Material: Metal

  ● Voltage: DC 12V

  ● Maximum push/pull: Approx. 6000n/6000n

  ● Optional stroke: 100mm, 150mm, 300mm, 500mm

  ● No-load speed: Maximum 5mm/s

  ● Rated load rate: 5mm/s(600kg)

  ● Environment temperature: -26°C to +65°C

  ● Standard protection level: IP54

  ● Built-in stroke switch: Yes

  ● Color: Silver

  ● Weight: Approx. 2053g~3280g / 72.4oz~115.7oz

  ● Quantity: 1pc

  Package List:

  1 x Linear Actuator

      About the wiring method: The plug on the push rod is used with our controller. If you don't use the matching controller, cut off the connector. There are two wires in the line to connect the positive and negative poles. The positive and negative poles are interchangeable to control the push and retraction. You can add a positive and reverse switch to control the extension and retraction